How to use a vacuum pump

Vacuum pump for member increase

Many men thought about increasing penis, but the methods they are familiar are a little scared.In medicine there is such a tool as a vacuum pump.

Used for surgery on male genitals to maintain penis size.

As the pump acts

The principle of work is quite simple.With the help of a vacuum around the penis, there is a weak pressure, causing blood circulation stimulation.Therefore, cavernous tissues are filled with blood, which is why a quick increase and hardening of the penis appear.A similar phenomenon in medicine is called hyperemia.

During the erection, the fabric of the penis is poured into blood, this is strongly swollen.The vacuum pump encourages vessels and allows you to maintain a size of Article from 30 to 60 minutes.Also, this device can be used instead of massage.

The pressure in the flask expands the cavernous body, significantly increasing blood flow and the size of the penis.The member after the pump looks much more spectacular than ordinary excitement.

Do not abuse the vacuum pump during use.The genitals will not become more than this than should, but bleeding, bruises and other complications can occur!

Varieties

Automatic vacuum pump with mounted monitor

All vacuum pumps have similar design, not taking into account their principle of action.The vessel in which is a male organ is a plastic zucchini with departments.Together with her, the set is the jet of seals and pears that pump pressure inside the zucchini.

There are devices with additional devices: Pressure adjustment buttons, manometers, reset valves.

In the manual air, pump and removes a pear or piston.Their app is good in being available to every man who wants to increase his genitals.

The automatic vacuum is created using an electric pump running on batteries.The pressure can be monitored on the mounted manometer, and some samples are equipped with a button for absorption force.

The water appliances are a modern option to increase male penis.Their principle of action is based on the fact that instead of air is a zucchini pump with water pumped.Hydraulic foam has greater efficiency, and life is longer.

How to choose a pump?

Hand vacuum pump with pear

The device is selected according to two criteria: in terms of genital and specific task.

  • The length of the vessel should be at least 2-3 cm higher than penis in excited condition;
  • The zucchini diameter must be selected 1-2 cm greater than the diameter of a male member during erection;
  • For those who do it for the first time, experts advise the use of the manual pump, where the pumping of air is pumped.

It is better to buy an apparatus with a transparent zucay to monitor the proceedings, and also pay attention to the power of the material from which it is created.

Pros and Disadvantages

The vacuum pump for men cannot just increase the size of the penis, but also has a therapeutic effect.If you are constantly using it, the amount of male genitalia increases more, and during sexual intercourse, the erection remains much longer.This is due to the reduction of the body's sensitivity.

Moreover, male dignity increases not only in length, but also width.

Also, under the influence of vacuum, you can adjust the form of a male organ, especially if there is a curvature.Inside the pump penis is evenly held from the edges of the walls, in this way is corrected.

Consequences of irregular use:

  • Due to the violation of capillaries, the distinctive spot occurs on the skin of the penis;
  • A reduction in ejaculation or erection;
  • Stiffness.
Banana and inch

Efficiency when using

With constant use, after six months the shape and size of the penis will become unchanged.The result will be much more efficient if you take medications that increase the release of male hormones during that time.

He became a member after the pump for longer up to 3 cm, for a period of 6 months to a year.The thickness of dignity has risen to 2 cm.

Instructions for use

If the vacuum pump is used for the first time, the process should not last more than 5 minutes to avoid unpleasant consequences.Incorrect use can lead to disorders of some functions as well as edema.

To prevent this from happening, the following recommendations must be followed

  • First, the air must be released from the device, it will improve the circulation of blood flow in the penis.Prior to that, it is necessary to take care of the penny lubrication.
  • An increase in penis should not last more than 20 minutes.
  • To reduce the pressure inside the vessel, you must start the air.To do this, just press the special valve located near the pear.In some models for this purpose there is a small hole that is covered with a finger during the proceedings.
  • Using the pump
  • Once the member reaches maximum hardness, you must put on the base ring, which allows for an opposing organ and hold it in the erection state.
  • If the pump with a hydraulic pump, then before the procedure is required for a relaxing bath with hot water.After that, after 8. minutes, male dignity must be set in a vacuum boat.The ring should fit firmly on the scrotum, thus reducing the pressure in this area.The device is placed in such a way that the distance from the penis on the zucchini walls is the same from all sides.It is important to do so before starting a moment of suction.Observing these instructions, injuries can be avoided.
  • In order to form a vacuum environment, experts advise several oscillatory movements.Then excess water descends using trigger.Sometimes the pump must be pressed several times so that the whole excess liquid leaves.
  • After lowering the water, you can rest a little and then proceed in the procedure.If the pressure falls, it must be pumped to the desired level.

The male advantage can be increased by special exercises, but for this, it is necessary to follow all the recommendations for the use of the device.

Through the first week, the procedure is made for 10 minutes once a day.

In the second week 15, a third 10 minutes twice a day.

Fourth - twice a day for 15, fifth - 20 minutes in the morning and 10 in the evening.

Possible consequences

With improper use of the device, injuries often appear.

  • Due to the stagnation of the lymph, the swollen ring appears around the penis head.Sometimes this problem can occur even with proper use.In such cases, it is better to stop the procedure for a while.
  • As a result of prolonged manipulation or low pressure in the vessel, a huge flow of lymph arises, forming swelling.
  • Deterioration of erection is the most common consequence.
  • A change of skin color can appear with a strong load.Due to severe discharge, bleeding is often acted, which can be irreversible.
  • Blocks Blood courts is the rarest problem, but dangerous, so it is better to delay the undertaking to increase the penis.

Contraindications

The duration of the vacuum environment is determined by the spread of the cell.Subject to all recommendations for the use of the device, an impulse effect inside the container is created.With his increment, a negative pressure appears, which causes stiffness, and the person does not feel pain.

The maximum amount of vacuum should not cause pain, but one effect no more than 18 seconds.The duration of vacuum manipulations daily must not exceed 45 minutes.

Male penis of the member has the following contraindications:

  • Mellitus diabetes;
  • sexually transmitted diseases;
  • inflammation of urethra;
  • Deterioration of the functions of excreted bodies of the digestive system;
  • Cardiovascular pathology;
  • The risk of blood clots.

Device operation

For the device to keep its suitability as long as possible, it needs special care.Since manipulations are carried out in an intimate place for which careful compliance with personal hygiene rules, the pump must be treated with antibacterial solutions.

Before use, it is recommended to wash the vacuum pump with warm water and soap and treat all its components of antiseptics.After the proceedings, this invention is re-sterilized, deleted and stored in a clean, dry place.

How to do it yourself?

The device can be useful not only to increase the size of the genital organ of man or medicinal therapy.

The pump can be made of improvised funds stored in the garage or leave.

Homemade Pag from the Shade

From the cuff pump

Before you start production, it is necessary to prepare all spare parts and tools that can be useful for use.Vacuum pump is usually made of car or bicycle pump.This is the simplest and most reliable method.

First you need to create the opposite pump effect so that it does not deliver air but on the contrary, pull it out.To perform such an effect, it is necessary to separate the pump, turning the cuff back, and then compile the device.This will create a vacuum environment.

Then mount the check valve to lower the excess air.This is a suitable aquarium compressor valve.It is built into the pump hose to prevent air penetration in the pump.For a greater effect, it is advised to seal.

This method is the simplest and is designed to create a shallow vacuum environment.Performance is up to 80% of air pumping.If you need to make a powerful pump, you can use a household compressor.

Using a medical syringe

We make a vacuum pump from a regular medical syringe.The following materials will be needed for that:

  • Plastic Tee;
  • The plastic tube, which should match with the diameter of the hole of Tee and the syringe;
  • two valves from the aquarium compressor;
  • Squestra (the power of the future device depends on its size).

From the plastic pipe, it is necessary to reduce three pieces of 10 cm and then fasten them to Tee.The compounds should be hermetically and well repaired so that they do not dig up when pressure occurs.Tee should be obtained with three delayers.

One of them located in the center is on the nose of the syringe.The remaining two ends need to install the valves, and one should open, the other inward.Not to be confused, the arrows are usually placed on the aquarium valves that indicate the direction of the air movement.

Such a device made of syringe can pump liquid from one tank to another.

To perform the procedure, one withdrawal with valve is lowered into a liquid and the other in the idle to be filled.The pump is driving using a piston.